The warmer months see a noticeable increase in the number and variety of pelagic species in our bluewater environment. Numerous billfish species including black, blue and striped marlin, as well as sailfish are caught – with the occasional spearfish as well. Additionally, desirable pelagics such as wahoo, mackerel (Spanish, spotted, shark and school), mahimahi, yellowtail kingfish, cobia and tuna (yellowfin, longtail, mack and striped) are all also on the agenda. These as well as many demersal species, all prey predominately on baitfish species – so using whole fish baits for these species is a wise choice. Rigging these baits well will make them more enticing and natural in appearance, which increases your chance of a solid connection to the attacking predator – due to more aggressive strikes and prominent hook positioning.
Anglers commonly use baitfish species such as yakkas, scad, cowanyoung, slimey mackerel, garfish, pike, and pilchard, as these are the species most likely to be preyed upon by pelagics and numerous demersal species in our area. Rigging, for each of these baits, is a fairly similar process – though it will depend on the target species and the location being fished, whether the baitfish will be alive or dead. Greater consideration needs to be given to live offerings, as you still need good hook coverage yet want to minimise damage to the baitfish to guarantee it is still swimming strong and healthy until a predator engulfs it.
Although experienced anglers all have their own preferences for rigging baits for certain species and situations; following are a few of the ways I rig baits for fishing throughout Southern Queensland. The first picture instructs the rigging of live bait for either slow trolling or dropping back into a baitfish school or adjacent to a structure. This rigging is especially popular with anglers targeting billfish in open waters where the bait is scattered. In this scenario, the billfish are usually cruising around plucking off what they can from what’s on offer. The rigged baitfish is slowly trolled (1-2 knots) with plenty of stopping to allow the bait to slowly sink down. Also, when large baitfish balls are located (these are formed when lurking predators condense the bait into a tight conglomeration), anglers will commonly use a bait jig to secure a few live baits out of the school, then rig the baitfish in the following way, and feed it back into the school.
These are just a few basic rigs, which can be used when targeting bluewater adversaries with whole live or dead fish baits. Many anglers have preferences for one or the other, and this will just expand from your personal experiences over time. However, this basic grounding in rigging of your baits will hopefully give you a decent idea, encouraging you to try some live baiting when you’re next out on the bluewater.
Reads: 7698![The basic rig for deploying a live-bait generally consists of a leader (60lb-100lb) around a metre long, with a no. 5 to no. 7 ball sinker secured about 30cm up from the hook with a crimp. A small loop is crimped in the other end to allow easy attachment](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_1.jpg)
The basic rig for deploying a live-bait generally consists of a leader (60lb-100lb) around a metre long, with a no. 5 to no. 7 ball sinker secured about 30cm up from the hook with a crimp. A small loop is crimped in the other end to allow easy attachment
![Continue to push the hook through, so that it’s now sitting prominently against the head of the bait, as shown. This bait is now ideal for slow trolling, or for sending back into the baitfish melee where a big pelagic will hopefully engulf it. Once the ba](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_10.jpg)
Continue to push the hook through, so that it’s now sitting prominently against the head of the bait, as shown. This bait is now ideal for slow trolling, or for sending back into the baitfish melee where a big pelagic will hopefully engulf it. Once the ba
![Another way of rigging live bait is to use a snelled hook rig. This consists of two hooks (J-pattern or circle), snelled onto the leader a suitable distance apart, so the leading hook can be passed sideways through the nose of the bait and the trailing ho](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_11.jpg)
Another way of rigging live bait is to use a snelled hook rig. This consists of two hooks (J-pattern or circle), snelled onto the leader a suitable distance apart, so the leading hook can be passed sideways through the nose of the bait and the trailing ho
![When fishing a dead or live bait in a strong current, or when slow trolling a live bait and favouring a double hook rig, pass the front hook up through the chin of the bait and out the top of the nose. This will keep the mouth shut and limit the bait from](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_12.jpg)
When fishing a dead or live bait in a strong current, or when slow trolling a live bait and favouring a double hook rig, pass the front hook up through the chin of the bait and out the top of the nose. This will keep the mouth shut and limit the bait from
![It has been proven using circle hooks will work better when attached to the leader with a stiff connection. This is achieved by passing the leader through one side of the hook eye, wrapping it around the hook shank at least once, then passing it back thro](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_2.jpg)
It has been proven using circle hooks will work better when attached to the leader with a stiff connection. This is achieved by passing the leader through one side of the hook eye, wrapping it around the hook shank at least once, then passing it back thro
![](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_3.jpg)
![Loop the rubber band over the hook shank (a no. 16 will do for most baits). If preparing rigs before the trip, you can use a clove hitch knot to keep the band on the hook – so they’re ready immediately when needed.](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_4.jpg)
Loop the rubber band over the hook shank (a no. 16 will do for most baits). If preparing rigs before the trip, you can use a clove hitch knot to keep the band on the hook – so they’re ready immediately when needed.
![Holding your live slimy mackerel or yakka securely, push the loop side of the needle up through the top of the eye socket from one side through to the other. There is a recess in the top of the eye socket and the needle will push through quite easily](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_5.jpg)
Holding your live slimy mackerel or yakka securely, push the loop side of the needle up through the top of the eye socket from one side through to the other. There is a recess in the top of the eye socket and the needle will push through quite easily
![Loop the rubber band over the eyelet in the needle, then pull the needle back through so that the rubber band is now fully through the eye socket with a loop on each side.](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_6.jpg)
Loop the rubber band over the eyelet in the needle, then pull the needle back through so that the rubber band is now fully through the eye socket with a loop on each side.
![Take the rubber band off the needle, and loop it over the hook so that both loops of the rubber band are now in the hook gape.](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_7.jpg)
Take the rubber band off the needle, and loop it over the hook so that both loops of the rubber band are now in the hook gape.
![Twist the hook around to wind up the rubber band until it is just about taut to the head of the live baitfish. Then pass the point of the hook between the head and the base of spiralled rubber band. The hook should be firm to the head but not too tight; o](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_8.jpg)
Twist the hook around to wind up the rubber band until it is just about taut to the head of the live baitfish. Then pass the point of the hook between the head and the base of spiralled rubber band. The hook should be firm to the head but not too tight; o
![](/img/uploads/916e4e49889015e382c1e6f9c22ffd9d_MacdTech117_9.jpg)